Exactly how to Troubleshoot and Fix an Electric Water Heater
Exactly how to Troubleshoot and Fix an Electric Water Heater
Blog Article
What are your ideas regarding Hot Water Heater Repair?
Several modern residences make use of an electric water heater for their heater, due to its comfort and convenience of use. However, similar to any other electrical home appliances, problems might emerge with its usage, all of a sudden. It can be really irritating to awaken to a chilly shower as opposed to a hot one or having your bath with water that isn't warm enough and even too hot. Whatever the instance may be, water heater troubles can be quite stressful. Fortunately, we've made a checklist of possible services to your hot water heater issues. There are a number of variables that could trigger most of these problems, it could be a concern with the power supply, the electrical heating element, or the thermostat. Prior to doing anything, guarantee you turn off the primary power supply for safety and security. Whatever the problem is, getting it repaired must not posture too much of a problem if you adhere to these steps:
Call A Professional:
If after changing all damaged components and resetting your temperature, the hot water heater still isn't functioning, you might need to get in touch with a professional plumber for a specialist point of view. The problem with your heating system could be that the cold and hot taps have been switched over or it might be undersized for the quantity of hot water needed in your home. Whatever the situation might be, a specialist plumber would certainly aid fix the issue.
Inspect Your Power Supply:
As fundamental as this might seem, it is very necessary. Without adequate power, your water heater will not function. So the first thing to do when your water suddenly stops working is to validate that it isn't a power issue. Inspect if the fuse is blown out or the breaker stumbled. If the breaker is the problem, just transform it on and off once again. Change any type of busted or damaged fuse. Examine the device with power after these adjustments to see if it's now working.
Check Your Thermostat:
If your water heater still isn't working or the water appearing isn't warm sufficient, you might require to inspect the temperature level settings on your top thermostat. Ensure the breaker is turned off before doing anything. Open the access panel and also press the red switch for temperature reset above the thermostat. This need to aid heat up the water. Turn the circuit breaker back on and also inspect if the issue has been settled.
Examine the Heating Element in the Water Heater:
If it's not a power trouble, after that try checking out your burner if it is still functioning. Evaluate each of your burner to make sure the trouble isn't with any one of them. If any one of them is defective, replace that component and afterwards check whether the hot water is back on.
Verdict
Water heater problems are not always significant. A number of them are due to small concerns like a blown fuse or worn-out heating element. Changing the malfunctioning parts should suffice. Nevertheless, if you are still unable to address the trouble, give a call to your closest plumber to come to get it repaired.
Common Reasons Why Your Hot Water Heater Isn’t Working
Water Gets Too Hot
Ouch! You wanted a hot shower, not boiling! If you have a newer model electric water heater, your water heater works with a thermostat (actually, two thermostats). If this thermostat has been jostled — or purposely reset — by someone in your home, the water flow will be much hotter than you expected.
FIX: Adjust the thermostat to a more moderate setting for producing hot water. Forty-nine degrees Celsius is recommended to prevent scalding.
Water Doesn’t Get Hot
This is the opposite of the previous problem, but it’s almost as bad. Your flow of hot water is merely lukewarm or even incoming cold water. Once again, an incorrect thermostat setting, or a faulty thermocouple in a gas water heater, could be to blame. Another explanation might be that there’s no power to the water heater (in the case of an electric heater) or the pilot light has gone out (if you have a gas unit).
FIX: Adjust your thermostat as necessary. If that doesn’t do the trick, check the power supply. Another possibility is the replacement of a damaged thermocouple in gas water heaters.
Leaking Water Heater
A leaking water heater (a sign may be low hot water pressure, or not enough hot water to shower) might be a reason to push the panic button… but first, take a few minutes to check where the leakage is coming from. Leaks near the top of the heater tend to indicate a problem with a valve, which won’t need a major repair. However, a leak from the water heater base is more serious.
FIX: You may need a qualified plumber to replace your drain valve or TPR (temperature pressure relief) valve. When your water heater is leaking from below, your plumber might be able to fix it if you call them soon enough. Otherwise, you will need to have a new water heater installed.
Noisy Water Heater
Sometimes your water heater might make some peculiar noises, loud enough to compete with your singing in the shower. Are these a cause for alarm? It depends on exactly what kind of sounds you are hearing. Sizzles and rumbles are both red flags, indicating a heavy sediment buildup in your hot water tank that might cause a breakdown in the near future. In addition, banging is a sign of a water hammer, which can lead to serious damage to your pipes.
FIX: To stop sizzling or rumbling, turn off the tank and have it flushed by a reliable plumbing company ASAP. Ask your plumber to install a water hammer arrestor to quiet down the banging and save the pipes.
Pilot Light Keeps Going Out
Many pilot lights go out once in a while, but when your water heater pilot light keeps going out continually, it’s a problem. And the chances are good that that problem stems from either a shortage of combustible air or a malfunctioning thermocouple.
FIX: Increase the air supply around your water heater by cleaning dust and lint off the appliance and clearing any clutter from the area around it. A bad thermocouple will require expert plumbing repair and is more than basic gas water heater troubleshooting.
Water Smells Bad
The water from your residential plumbing pipes should smell neutral. If it has a strong unpleasant odour, something’s wrong. To check whether your water heater is at fault, turn on a hot water faucet and let it run for a few minutes. And, yes, use your nose to determine exactly what you are smelling.
FIX: For a garlicky odour, relight the pilot light on your water tank. When you detect the scent of garbage, you’ll need a professional plumber to flush the hot water tank and possibly replace the anode rod. A strong smell of rotten eggs could signal a hazardous gas leak; turn off the gas supply if possible, get everyone out of your house, and make an emergency call to the gas company.
Water Looks Brown Or Rusted
The first thing to do is ask yourself, “Is the brown, rusty-looking water coming only from my hot water taps?” If the answer is yes, then most likely, either the anode rod or the water heater interior is starting to rust, especially if your hot water heater is nearing the end of its life expectancy. (A “no” answer means the issue does not originate from the hot water heater but rather from the water supply.)
FIX: Contact a plumber to inspect the water heater. If you catch the problem quickly enough, it might be fixable. Otherwise, you’ll need a water heater replacement. Consider installation of an efficient new tankless water heater.
https://www.huskyair.com/blog/hot-water-heater-isnt-working/
As a keen reader about How to Troubleshoot and Repair an Electric Water Heater, I figured sharing that excerpt was really useful. Appreciated our blog? Please share it. Let other people locate it. Thank you for your time spent reading it.
Top Article
Report this page